Synergy D30/D44 Heavy Duty Front Ball Joint Sets
SKU:
$120.00
100
220
$100.00 - $220.00
Unavailable
per item
- Designed to replace the factory ball joints that are prone to premature wear on lifted vehicles with large off-road tires
- Fully greasable metal on metal design
- Machined bearing housing made from sintered graphite, bronze, and 1045 steel for a strong, smooth, bearing surface
- Ball joint stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
- Uses a larger stud than stock
- Ball joint boot is made from tear/wear resistant silicone polyurethane
- Completely eliminates the stock style nylon liner for improved performance and durability
- Outperforms the factory ball joint assembly and includes all necessary hardware for installation
- Single Set includes: (1) upper, (1) lower
- Complete Set includes: 2 Single Sets
- 12 Month Unlimited-Warranty (see warranty information)
- Synergy High Performance Grease (4119) is the recommended grease for this product
Note: Synergy HD Ball Joints are compatible with RCV axles.
The Staun II Dual Internal Beadlock system divides a tire's air chamber into two parts (two valve stems). This means that the internal beadlock's high pressure (50 psi) securely holds BOTH tire beads to the wheel, allowing the tire pressure to be set for optimum performance without worries of rolling the tire bead off the wheel. Tire pressures using the Staun II have been known to run as low as 2 or 3 psi, which can be ideal when striving for ultimate traction through soft, snowy, sandy, and muddy terrain!
During hard landings or severe tire compression, the 50 psi beadlock also acts as a secondary bump stop and protects the tire and wheel from impact damage, otherwise unavoidable without the Staun II Dual Internal Beadlock
Available in the following sizes:
- 15" diameter X 7 to 10" wide wheel
- 16" diameter X 7 to 10" wide wheel
- 17" diameter X 7 to 9" wide wheel
Staun Internal Beadlocks have been proven in the most demanding environments including, multiple SCORE Baja 1000 wins, Rock Crawling Championships and record breaking Diesel Drag Racing with 1200 ft. lb. of torque at only 12-13 psi tire pressure! Simply put, Staun II Dual Internal Beadlocks can be used for all types of terrain with existing wheels including: rock, sand, mud, snow, pavement, track, and trail.
Coyote Enterprise's Staun II takes Dual Internal Beadlock technology to new heights over the original Staun Beadlock by utilizing much stronger materials, stronger sewing methods, using a more durable inner tube, providing an easier-to-use Air Channel and now proudly being Made in the USA.
Staun II Highlights:
- Locks both tire beads to the wheel at 50 psi
- Allows lower tire pressures without tire/wheel slipping
- Uses your existing wheels
- No balance issues
- No DOT issues
- Works at high speed and low speed
- Acts as a 50 psi bump stop protecting your tires and wheels from impact damage
- Provides "limp flat" capabilities for choosing a safer tire changing location
- Long lasting
- Protected from ozone and the sun's damaging ultra violet rays
- Can be transferred to your new (same size) wheel choice
- For off highway use only
- 12 month warranty
- Proudly Made in the USA
During hard landings or severe tire compression, the 50 psi beadlock also acts as a secondary bump stop and protects the tire and wheel from impact damage, otherwise unavoidable without the Staun II Dual Internal Beadlock
Available in the following sizes:
- 15" diameter X 7 to 10" wide wheel
- 16" diameter X 7 to 10" wide wheel
- 17" diameter X 7 to 9" wide wheel
Staun Internal Beadlocks have been proven in the most demanding environments including, multiple SCORE Baja 1000 wins, Rock Crawling Championships and record breaking Diesel Drag Racing with 1200 ft. lb. of torque at only 12-13 psi tire pressure! Simply put, Staun II Dual Internal Beadlocks can be used for all types of terrain with existing wheels including: rock, sand, mud, snow, pavement, track, and trail.
Coyote Enterprise's Staun II takes Dual Internal Beadlock technology to new heights over the original Staun Beadlock by utilizing much stronger materials, stronger sewing methods, using a more durable inner tube, providing an easier-to-use Air Channel and now proudly being Made in the USA.
Staun II Highlights:
- Locks both tire beads to the wheel at 50 psi
- Allows lower tire pressures without tire/wheel slipping
- Uses your existing wheels
- No balance issues
- No DOT issues
- Works at high speed and low speed
- Acts as a 50 psi bump stop protecting your tires and wheels from impact damage
- Provides "limp flat" capabilities for choosing a safer tire changing location
- Long lasting
- Protected from ozone and the sun's damaging ultra violet rays
- Can be transferred to your new (same size) wheel choice
- For off highway use only
- 12 month warranty
- Proudly Made in the USA